Drill Bits

Drill Bits


Show:
Sort By:

0.3mm HSS-G Titanium Nitride Coating Drill Bit

The Tin wear resistant coating increases the surface hardness to approx 2300HV and the heat resistan..

€2.40 Ex VAT: €1.95

0.4mm HSS-G Titanium Nitride Coating Drill Bit

The Tin wear resistant coating increases the surface hardness to approx 2300HV and the heat resistan..

€2.40 Ex VAT: €1.95

0.5mm HSS-G Titanium Nitride Coating Drill Bit

The Tin wear resistant coating increases the surface hardness to approx 2300HV and the heat resistan..

€2.40 Ex VAT: €1.95

0.6mm HSS-G Titanium Nitride Coating Drill Bit

The Tin wear resistant coating increases the surface hardness to approx 2300HV and the heat resistan..

€2.40 Ex VAT: €1.95

0.7mm HSS-G Titanium Nitride Coating Drill Bit

The Tin wear resistant coating increases the surface hardness to approx 2300HV and the heat resistan..

€2.40 Ex VAT: €1.95

0.8mm HSS-G Titanium Nitride Coating Drill Bit

The Tin wear resistant coating increases the surface hardness to approx 2300HV and the heat resistan..

€2.40 Ex VAT: €1.95

1.5mm Ruko Cobalt Drill Bit

Total length - 40.0mm Flute length - 18.0mm Point cut - from 3.0mm with split point DIN 1412C P..

€2.03 Ex VAT: €1.65

10 x 168mm Morse Taper Shank Drill Bit

Point cut - cut chisel edge in accordance with DIN 1412A Point angle - 118 deg Helix angle - 20-30..

€6.77 Ex VAT: €5.50

10.5 x 168mm Morse Taper Shank Drill Bit

Point cut - cut chisel edge in accordance with DIN 1412A Point angle - 118 deg Helix angle - 20-30..

€6.77 Ex VAT: €5.50

10.5mm Ruko Cobalt Drill Bit

Total length - 133.0mm Flute length - 87.0mm Point cut - from 3.0mm with split point DIN 1412C ..

€8.98 Ex VAT: €7.30

11.5 x 175mm Morse Taper Shank Drill Bit

Point cut - cut chisel edge in accordance with DIN 1412A Point angle - 118 deg Helix angle - 20-30..

€7.38 Ex VAT: €6.00

11.5mm Ruko Cobalt Drill Bit

Total length - 142.0mm Flute length - 94.0mm Point cut - from 3.0mm with split point DIN 1412C ..

€11.50 Ex VAT: €9.35

12 x 182mm Morse Taper Shank Drill Bit

Point cut - cut chisel edge in accordance with DIN 1412A Point angle - 118 deg Helix angle - 20-30..

€7.75 Ex VAT: €6.30

12.5mm Ruko Cobalt Drill Bit

Total length - 151.0mm Flute length - 101.0mm Point cut - from 3.0mm with split point DIN 1412C ..

€11.69 Ex VAT: €9.50

13.5 x 189mm Morse Taper Shank Drill Bit

Point cut - cut chisel edge in accordance with DIN 1412A Point angle - 118 deg Helix angle - 20-30..

€10.09 Ex VAT: €8.20

13.5mm Ruko Cobalt Drill Bit

Total length - 160.0mm Flute length - 108.0mm Point cut - from 3.0mm with split point DIN 1412C ..

€16.97 Ex VAT: €13.80

14 x 189mm Morse Taper Shank Drill Bit

Point cut - cut chisel edge in accordance with DIN 1412A Point angle - 118 deg Helix angle - 20-30..

€10.76 Ex VAT: €8.75